Filter
Top Products
9 Applied Instructions (Arithmetic and Logical Operation)
9.8 WOR / Logical Word OR
188
FXCPU Structured Programming Manual
[Basic & Applied Instruction]
Function and operation explanation
1. 16-bit operation(WOR, WORP)
The logical sum (OR) operation is executed to the contents specified by and in units of bit, and the
result is transferred to the device specified by .
• While the command input is OFF, the data of the transfer destination specified by does not change.
• While the command input is ON, the data of the transfer sources specified by and do not
change.
• When a constant (K) is specified in the transfer sources specified by and , it is automatically
converted into the binary format.
• The logical sum operation is executed in units of bit as shown in the table below (1 ∨ 1 = 1, 0 ∨ 1 = 1,
0 ∨ 0 = 0 and 1 ∨ 0 = 1).
In the table : 1=ON, 0=OFF
2. 32-bit operation(DOR, DORP)
The logical sum (OR) operation is executed to the contents specified by and in units of bit, and the
result is transferred to the device specified by .
• While the command input is OFF, the data of the transfer destination specified by does not change.
• While the command input is ON, the data of the transfer sources specified by and do not
change.
• When a constant (K) is specified in the transfer sources specified by and , it is automatically
converted into the binary format.
• The logical sum operation is executed in units of bit as shown in the table below (1 ∨ 1 = 1, 0 ∨ 1 = 1,
0 ∨ 0 = 0 and 1 ∨ 0 = 1).
In the table : 1=ON, 0=OFF
Cautions
1) Instructions of pulse operation type are not provided in the FX0, FX0S or FX0N PLC.
To execute pulse operation, make the instruction execution condition pulse type.
2) Some restrictions to applicable devices
S1:The FX
3G, FX3GC, FX3U and FX3UC PLCs only are applicable.
S2:The FX
3U and FX3UC PLCs only are applicable.
WOR
Logical operation
(unit: bit)
000
101
011
111
+1, +1,
+1,
DOR instruction
Logical operation
(unit: bit)
000
101
011
111
Command input
Logical sum
data 1
Logical sum
data 2
Logical sum result
WOR
EN
s1
s2
ENO
d1
∨ →
ds1 s2
Command input
Logical sum result
DOR
EN
s1
s2
ENO
d
+1, ∨ +1, → +1,
s1 s1 s2 s2 d d
Logical sum
data 1
Logical sum
data 2