Filter
Top Products
17 Applied Instructions (Data Transfer 2)
17.2 ZPOP / Batch POP of Index Register
438
FXCPU Structured Programming Manual
[Basic & Applied Instruction]
Related instructions
Caution
• The instruction is provided in the FX3UC PLC Ver. 2.20 or later.
Error
It is an operation error in the following case, and error flag M8067 is turned ON, and error code is stored in
D8067.
• When the content of the number of retraction of the device specified by during execution of ZPOP
instruction is 0 or negative. (Error code: K6706)
Program example
→ As for program examples, refer to section 17.1.
Instruction Content
ZPUSH This instruction temporarily retracts the present values of index registers V0 to V7, Z0 to Z7.