Filter
Top Products
60
FX3G/FX3U/FX3UC Series Programmable Controllers
Programming Manual - Basic & Applied Instruction Edition
2 Overview (Sequence Program)
2.7 Types and Setting of Parameters
8 Setting positioning
The positioning setting function is available in all FX3G PLCs and FX3U/FX3UC PLCs Ver. 2.20 or later.
1. Click "Positioning" tab.
"Positioning" tab is displayed when a check mark is put to "Positioning" on "Memory capacity"
tab.
2. Set the positioning constants in TBL (FNC152) instruction.
→ For TBL (FNC152) instruction, refer to the Positioning Control Manual.
This example shows a window in
an FX
3U/FX3UC PLC.