33
FX3G/FX3U/FX3UC Series Programmable Controllers
Programming Manual - Basic & Applied Instruction Edition
2 Overview (Sequence Program)
2.6 Program Memory and Devices
1
Introduction
2
Overview
3
Instruction
List
4
Devices
in Detail
5
Specified the
Device &
Constant
6
Before
Programming
7
Basic
Instruction
8
FNC00-FNC09
Program Flow
9
FNC10-FNC19
Move & Compare
10
FNC20-FNC29
Arith. & Logic
Operation
2. In FX3G PLCs
FX3G PLCs are equipped with the EEPROM memory as standard.
1) When using the built-in memory (without attached memory cassette)
2) When using an attached memory cassette (without using the built-in program memory)
CPU System ROM
Built-in program memory
(EEPROM)
Parameter
File register (D)
Comment
Sequence program
(EEPROM)
Memory cassette
Built-in device memory (RAM, EEPROM)
[Bit device memory]
• Data register (D)
• Timer present value register (T)
• Counter present value register (C)
• Index register (V, Z)
Contact image memory
• Input relay (X) • Output relay (Y)
• Auxiliary relay (M) • State relay (S)
Timer contact and time counting coil
Counter contact, counting coil, and reset coil
• Extension register (R)
[Data memory]
Transfer and initialization by
instructions
Extension file register (ER)
Not attached
CPU System ROM
Built-in program memory
(EEPROM)
Not used
(EEPROM)
Parameter
File register (D)
Comment
Sequence program
Extension file register (ER)
Built-in device memory (RAM, EEPROM)
[Bit device memory] [Data memory]
Transfer and initialization by
instructions
Contact image memory
• Input relay (X) • Output relay (Y)
• Auxiliary relay (M) • State relay (S)
Timer contact and time counting coil
Counter contact, counting coil, and reset coil
• Data register (D)
• Timer present value register (T)
• Counter present value register (C)
• Index register (V, Z)
• Extension register (R)
Memory cassette
The PLC automatically recognizes attachment of a
memory cassette (when the power is turned ON),
and disconnects the built-on program memory.
(The priority is given to the memory cassette.)