Mitsubishi Electronics FX3G Video Gaming Accessories User Manual


 
256
FX3G/FX3U/FX3UC Series Programmable Controllers
Programming Manual - Basic & Applied Instruction Edition
9 Move and Compare – FNC 10 to FNC 19
9.7 FNC 16 – FMOV / Fill Move
9.7 FNC 16 – FMOV / Fill Move
Outline
This instruction transfers same data to specified number of devices.
1. Instruction format
2. Set data
3. Applicable devices
S: This function is supported only in FX3U/FX3UC PLCs.
Explanation of function and operation
1. 16-bit operation (FMOV and FMOVP)
The contents of are transferred to "n" devices starting from .
The contents will be same among all of "n" devices.
If the number of points specified by "n" exceeds the device number range, data is transferred within the possible
range.
While the command input is OFF, the transfer destination does not change.
While the command input is ON, the data of the transfer source does not change.
When a constant (K) is specified as the transfer source , it is automatically converted into binary.
Operand Type Description Data Type
Transfer source data or device number storing data 16- or 32-bit binary
Head word device number of transfer destination (Same data is transferred from the
transfer source at one time.)
16- or 32-bit binary
n Number of transfer points [K1 n K512, H1 n H1FF] 16-bit binary
Oper-
and
Type
Bit Devices Word Devices Others
System User Digit Specification System User
Special
Unit
Index
Con-
stant
Real
Number
Charac-
ter String
Pointer
XYMTCSD.b KnX KnY KnM KnS T C D R U\G VZModifyKH E ""P
33333333 S 33 3 33
3333333 S 3
n 33
DFMOV
DFMOVP
Mnemonic Operation Condition
P
FNC 16
FMOV
D
16-bit Instruction
7 steps
FMOV
FMOVP
Mnemonic Operation Condition
Continuous
Operation
Pulse (Single)
Operation
32-bit Instruction
13 steps
Continuous
Operation
Pulse (Single)
Operation
S
D
S
D
S
D
D
S
S
FNC 16
FMOV
n
S
D
Command
input
+1
+2
+3
+4
n
S
D
D
D
D
D