Filter
Top Products
506
FX3G/FX3U/FX3UC Series Programmable Controllers
Programming Manual - Basic & Applied Instruction Edition
18 Floating Point – FNC110 to FNC139
18.11 FNC123 – EDIV / Floating Point Division
18.11 FNC123 – EDIV / Floating Point Division
Outline
This instruction executes division of two binary floating point.
→ For program examples of floating point operations, refer to Section 12.10.
→ For handling of floating point, refer to Subsection 5.1.3.
→ For flag operations, refer to Subsection 6.5.2.
1. Instruction format
2. Set data
*1. When a constant (K or H) is specified, it is automatically converted into binary floating point (real number)
when the instruction is executed.
3. Applicable devices
S: This function is supported only in FX3U/FX3UC PLCs.
Explanation of function and operation
1. 32-bit operation (DEDIV and DESDIVP)
Binary floating point data [ +1, ] is divided by binary floating point data [ +1, ], and the division
result in the binary floating point format is transferred to [ +1, ].
When a constant (K or H) is specified as [ +1, ] or [ +1, ], it is automatically converted into
binary floating point.
Operand Type Description Data Type
Word device number storing binary floating point data used in division
Real number (binary)
*1
Word device number storing binary floating point data used in division
Data register number storing binary floating point data obtained by division
Oper-
and
Type
Bit Devices Word Devices Others
System User Digit Specification System User
Special
Unit
Index
Con-
stant
Real
Number
Charac-
ter String
Pointer
XYMTCSD.b KnX KnY KnM KnS T C D R U\G VZModifyKH E ""P
33 S 333 3
33 S 333 3
33 S 3
P
FNC 123
EDIV
D
−
Mnemonic Operation Condition
16-bit Instruction
DEDIV
DEDIVP
Mnemonic Operation Condition
32-bit Instruction
13 steps
Continuous
Operation
Pulse (Single)
Operation
S
1
S
2
D
S
1
S
2
D
S
1
S
1
S
2
S
2
D
D
Command
input
FNC123
DEDIV
S
1
S
2
D
[ +1, ]
÷
[ +1, ]
→
[ +1, ]
Binary floating point Binary floating point Binary floating point
S
1
S
1
S
2
S
2
D
D
Dividend Divisor
S
1
S
1
S
2
S
2
Command
input
FNC123
DEDIV
K100
S
1
D
[ +1, ]
÷
[ K100 ]
→
[ +1, ]
Binary floating point Automatically
converted into binary
floating point
Binary floating point
S
1
S
1
D
D
Dividend Divisor