Filter
Top Products
520
FX3G/FX3U/FX3UC Series Programmable Controllers
Programming Manual - Basic & Applied Instruction Edition
18 Floating Point – FNC110 to FNC139
18.21 FNC133 – ASIN / Floating Point Arc Sine
18.21 FNC133 – ASIN / Floating Point Arc Sine
Outline
This instruction executes the SIN
−1
(arc sine) operation.
→ For handling of floating point, refer to Subsection 5.1.3.
1. Instruction format
2. Set data
3. Applicable devices
Explanation of function and operation
1. 32-bit operation (DASIN and DASINP)
An angle is obtained from the sine value stored in [ +1, ], and stored to [ +1, ].
A real number can be directly specified as .
• The sine value stored in [ +1, ] can be set within the range from −1.0 to +1.0.
• The angle (operation result) stored in [ +1, ] is expressed in radians (from −π/2 to π/2).
For conversion between radians and degrees, refer to RAD (FNC136) and DEG (FNC137) instructions.
→ For RAD (FNC136) instruction, refer to Section 18.24.
→ For DEG (FNC137) instruction, refer to Section 18.25.
Error
An operation error is caused in the following case; The error flag M8067 turns ON, and the error code is stored in
D8067.
• When a value specified in is outside the range from −1.0 to +1.0 (error code: K6706)
Operand Type Description Data Type
Head device number storing a sine value used in the SIN
−1
(arc sine) operation.
Real number (binary)
Head device number storing the operation result
Oper-
and
Type
Bit Devices Word Devices Others
System User Digit Specification System User
Special
Unit
Index
Con-
stant
Real
Number
Charac-
ter String
Pointer
XYMTCSD.b KnX KnY KnM KnS T C D R U\G VZModifyKH E ""P
33 3 3 3
33 3 3
−
−
Mnemonic Operation Condition
16-bit Instruction
DASIN
DASINP
Mnemonic Operation Condition
32-bit Instruction
9 steps
Continuous
Operation
Pulse (Single)
Operation
P
FNC 133
ASIN
D
S
D
S
D
S
S
D
D
S
Command
input
FNC133
DASIN
S
D
+1
Binary floating point
(real number)
+1
Binary floating point
(real number)
SIN
−
1
S
S
D
D
S
S
D
D
S