Filter
Top Products
86
S:\agilent\e8285\REFGUIDE\MANUAL\screens.chp
Chapter 3, Description of Screens
Call Control Screens
Call Control Screens
Figure 7 The CALL CONTROL Screen
NOTE: The number and type of fields displayed on the CALL CONTROL screen depends on the
selected system type.
The CALL CONTROL screen is the primary analog call processing screen. It
contains the most often used call processing configuration and command fields.
Figure 7 shows the CALL CONTROL screen for AMPS.
The top right-hand portion of the CALL CONTROL screen is used to display the
following information:
• decoded data messages received from the mobile station on the reverse control channel
or the reverse voice channel
• modulation quality measurements made on the mobile station’s RF carrier while on a
voice channel
• raw data message bits, displayed in hexadecimal format, received from the mobile
station on the reverse control channel or reverse voice channel when a decoding error
occurs
The type of information to be displayed is selected using the Display field. Refer
to the
Display field description, on page 223 for further information.