Filter
Top Products
55
Chapter 1, Description of Keys
Keys
NOTE: The :REGister:CLEar:ALL command is only valid for the internal save/recall mass storage
device. To clear all saved instrument states from the Card, RAM, or Disk save/recall mass
storage devices, each file must be removed individually using the :REGister:CLEar ’<file
name>’ command.
Example
OUTPUT 714;"REG:CLE ’SETUP2’"
This clears the instrument state SETUP2 from the selected save/recall mass
storage device.
Example
OUTPUT 714;"REG:CLE:ALL"
This clears all saved instrument states from the internal save/recall mass storage
device.
See Also
“Saving and Recalling Instrument Setups” in the Operating Overview chapter of
the E8285A User’s Guide
“Measurement Triggering Process” in the Operating Overview chapter of the
E8285A User’s Guide
“*SAV (Save Instrument State)” in the GPIB Common Commands chapter of the
E8285A Condensed Programming Reference Guide
“*RCL (Recall Instrument State)” in the GPIB Common Commands chapter of
the E8285A Condensed Programming Reference Guide
Shift
Shift is used to selected the blue-labeled functions listed above some keys (such as
Printer, Config, Release, EEX, and so forth).
GPIB Example
No equivalent GPIB command