Filter
Top Products
264
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
Frames
This field indicates the number of frames counted during the reporting interval.
GPIB Example
“DISP CFER;CDMA:MOBile:FERasure:ERRors?“
queries the number of frames counted by the mobile station during an FER report
interval.
Operating Considerations
The reporting interval is specified in terms of error count or frame count.
See Also
by # errors
field description, on page 187
by # frames
field description, on page 188
MS FER Report Interval
field description, on page 308
Screens Where Field is Present
CDMA MOBILE REPORTED
Frames Counted
This field displays the number of frames tested during a FER measurement.
GPIB Example
“DISP CRXT;MEASure:CDManalyzer:FERasure:FRAMes?“
queries the FER frames measurement result.
Operating Considerations
A measurement result will be displayed at the end of a test if Display Interim
Results
is No. Measurement results will be displayed continuously if Display
Interim Results
is Yes.
Screens Where Field is Present
CDMA CELLULAR MOBILE RECEIVER TEST