Filter
Top Products
283
Chapter 4, Description of Fields
Fields
Level (div)
This control is divided into two fields:
The upper field (
0.00) sets the internal trigger level as a function of vertical
divisions. The trigger level is indicated by small pointers that appear on each side
of the screen (only used for internal triggering).
The lower field (
Pos/Neg) specifies whether triggering happens when the
waveform being measured is positive-going (
Pos), or negative-going (Neg).
Screens Where Field is Present
OSCILLOSCOPE
Library
This field displays the library information of the file chosen in the Select
Procedure Filename:
field.
Screens Where Field is Present
TESTS (Main Menu)
Lines/Page
This field is used to specify how many lines are printed per page.
Screens Where Field is Present
TESTS (Printer Setup)
PRINT CONFIGURE
Lower and Upper ACP [Ratio:Level]
These two measurements display the amount of power in signals above and below
the
Tune Freq signal. The level is displayed as a ratio (referenced to the power
around the
Tune Freq) or as an absolute value.
See Also
ACP Meas
field description, on page 153
Screens Where Field is Present
ADJACENT CHANNEL POWER