Filter
Top Products
310
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
Network ID
This field allows entry of the cell site’s network identification (NID).
GPIB Example
“DISP CCON;CDMA:CELL:CONFigure:NID 0“
sets the network identification of the simulated CDMA cell site to 0.
Operating Considerations
The mobile station stores the NID number it receives from the cell site and
compares it with its home NID to determine if it is roaming.
Screens Where Field is Present
CDMA CELL SITE CONFIGURATION
Netwrk Code
This field is displayed when the field called "Protocol" on page 346 has IS-95A,
TSB-74, or J-STD-008 selected, and the Esc Mode field is set to Off
.
This field sets the base station’s network code.
GPIB Example
“CDMA:CELL:CONF:BNC 2”
sets the base station’s network code to 2.
Operating Considerations
The Test Set sends the base station network code in the IMSI_11_12 field of the
Extended System Parameters Message.
See Also
Protocol
field description, on page 346
Screens Where Field is Present
CDMA CELL SITE CONFIGURATION