Filter
Top Products
267
Chapter 4, Description of Fields
Fields
Frequency (Analog)
This field displays transmitter frequency when a signal is present and Frequency
is selected from the following list of choices available in an unnamed field at the
top of the display:
• Freq Error
• Frequency
GPIB Example
“DISP DUPL;MEAS:RFR:SEL ‘Frequency’”
displays the DUPLEX TEST screen and selects the Frequency measurement field.
Operating Considerations
This measurement area is used to display transmitter frequency. Four dashes
indicate no signal is present at the current tune frequency
.
See Also
Freq Error (Analog)
field description, on page 266
Screens Where Field is Present
RF ANALYZER
DUPLEX TEST
RF GENERATOR
AF ANALYZER
ADJACENT CHANNEL POWER
TX TEST
CALL CONTROL (when Meas is selected in the Display field)