Filter
Top Products
206
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
Cntry Code
This field sets the base station’s country code. This field is displayed when the
field
"Protocol" on page 346 has IS-95A, TSB-74, or J-STD-008 selected and the
Esc Mode field is set to Off
.
GPIB Example
“CDMA:CELL:CONF:BCC 2”
sets the base station’s country code to 2.
Operating Considerations
The Test Set sends the base station country code in the MCC field of the Extended
System Parameters Message.
See Also
Protocol
field description, on page 346
Screens Where Field is Present
CDMA CELL SITE CONFIGURATION
Code Location
This field is used to select where the program (code file) for the test procedure is
stored. Code files are the main program files of the software, containing all of the
test subroutines. If an Agilent Technologies 83217 memory card is catalogued, the
code file is preceded by a lower-case c.
Screens Where Field is Present
TEST (Save/Delete Procedure)