Filter
Top Products
383
Chapter 4, Description of Fields
Fields
Send Msg (CDMA Swept Power Measurement)
This field allows the user to specify whether a Pilot Measurement Request Order
(PMRO), Extended Handoff Direction Message (EHDM) with One Pilot Record,
EHDM with Two Pilot Records, or none of the above is to be sent on the Forward
Traffic Channel.
GPIB Example
“CDMA:MOB:SNDM ’ExtHoDP1P2’”
determines if a message will be sent and, if so, the format of the message.
Operating Considerations
Select among the following to specify the message or messages:
Null – No message.
PltMeasReqO – PMRO.
ExtHoDP1 – EHDM with PN1.
ExtHoDP1P2 – EHDM with PN1 and PN2.
The default selection is Null.
The
ExtHoDP1 and ExtHoDP1P2 fields appear only if a valid protocol is selected
in the
Protocol field. The valid protocols are:
TIA-EIA-98-B
ARIB-53
J-STD-008
Kor PCS
TSB-74
Screens Where Field is Present
CDMA MOBILE REPORTED PILOT STRENGTH
Send Word
The Send Word field is an immediate action field. The current word in the Set
Message
field is immediately sent to the mobile station. The Send Word
command is only intended for use with MSMessOrd and does not provide any
method for controlling the timing of the word sent to the mobile station.
Screens Where Field is Present
CALL BIT