Filter
Top Products
396
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
SINAD
This is the default measurement for this field. Selecting this field displays the
following measurement choices:
SINAD
Distn (Distortion)
SNR (Signal to Noise Ratio)
AF Freq
DC Level
Current (DC only)
Operating Considerations
This is a priority control field. Accessing the RX TEST or TX TEST screen
overrides any changes made to this field in other screens.
For more information about SNR operation, see the
SNR field description, on page
398
.
Screens Where Field is Present
RX TEST
AF ANALYZER
TX TEST
DUPLEX TEST
RF GENERATOR
RF ANALYZER
Slope (CDMA Swept Power Measurement)
This field sets the edge of the amplitude trigger pulse on which the measurement
will trigger.
GPIB Example
“CDMA:SWEPtpower:TRIGger:SLOPe ‘Rising’”
sets the trigger slope.
Operating Considerations
Select the edge of the trigger pulse that will trigger the measurement. The
selections are:
Rising and Falling. The default is Rising.
Screens Where Field is Present
CDMA SWEPT POWER MEASUREMENT (When the Controls field is set to
Trigger)