Filter
Top Products
419
Chapter 4, Description of Fields
Fields
System Type (CDMA-to-CDMA or CDMA-to-Analog Handoff)
This field selects the type of system that the Test Set will attempt to handoff the
mobile station to when the field titled
"Execute (Handoff)" on page 250 is selected.
GPIB Example
“CDMA:CALL:AHANdoff:CHANnel:STYPe ‘AMPS’“
selects the AMPS system type for a CDMA to analog handoff.
Operating Considerations
If the RF Chan Std field is set to MS AMPS, US PCS, MS TACS, MS JTACS,
Japan CDMA, Kor PCS P0, or Kor PCS P1, the available selections are:
• AMPS
• NAMPS Low
• NAMPS Mid
• NAMPS Uppr
• NAMPS Wide
• TACS
• J-STD-008 (available only when the Protocol field is set to TSB-74)
• TSB-74 (available only when the Protocol field is set to J-STD-008)
• TIA/EIA-95B (available only when the Protocol field is set to TIA/EIA-95B)
• NTACS Nrw (available only when the Protocol field is set to ARIB T53)
• NTACS Wide (available only when the Protocol field is set to ARIB T53)
• JTACS (available only when the Protocol field is set to ARIB T53)
If the RF Chan Std field is set to MSL NAMPS, MSM NAMPS, MSU NAMPS, MS
ETACS
, MS NTACS, or USER DEF, the available selections are:
• AMPS
• NAMPS Low
• NAMPS Mid
• NAMPS Uppr
• NAMPS Wide
• TACS
• NTACS Nrw (available only when the Protocol field is set to ARIB T53)
• NTACS Wide (available only when the Protocol field is set to ARIB T53)
• JTACS (available only when the Protocol field is set to ARIB T53)
In all instances, the default is AMPS.
Screens Where Field is Present
CDMA CALL CONTROL