Filter
Top Products
359
Chapter 4, Description of Fields
Fields
Operating Considerations
Mobile station registration can occur as a result of the following events:
• The mobile station power is cycled
• The “Register” feature is selected by selecting this field or sending the GPIB command
shown above.
• A call is made by pressing the Call/Page key with the MS ID mode Auto.
• A mobile-station initiated call is made. This event causes an implicit registration to be
performed.
When the Register field is selected, the Registering annunciator will light
until the registration is successful, or the registration attempt times-out.
See Also
“Setting up a Call” chapter in the E8285A Application Guide
MS ID field description, on page 308
Screens Where Field is Present
CDMA CALL CONTROL
Register (annunciator)
When lit, the Register annunciator indicates that the mobile station connected
to the Test Set is being commanded to register with the Test Set.
The
Register annunciator is not programmable.
The state of the
Register annunciator is reflected in the Call Processing Status
Register Group Condition Register bit 1.
See “Call Processing Status Register Group” in the Status Reporting chapter of
the E8285A User’s Guide for further information.
Screens Where Field is Present
CALL CONTROL
CDMA AUTHENTICATION