Filter
Top Products
63
Chapter 1, Description of Keys
DATA FUNCTIONS Keys
Guidelines for Using Numeric Entry Field Data Functions
• Increment values are set, scaled, and changed for individual numeric entry fields. The
GPIB data function commands must immediately follow the GPIB command for the
individual field. For example, to set the increment value for the RF Generator frequency
to 2.5 MHZ, the following command string would be sent to the Test Set:
OUTPUT 714;"RFG:FREQ:INCR 2.5 MHZ"
• GPIB Units (UNITs) are used with the data functions to specify the units-of-measure
for numeric data which is read or set through GPIB.
Refer to “To Specify Units-of-Measure for GPIB Data Transfer” in
the Operating
Overview
chapter of the E8285A User’s Guide.
• Data function settings are not retained. The setting values are initialized or changed
under the following conditions:
• The Test Set is turned off (values initialized on power up).
• The Test Set is preset (values initialized).
• A saved register is recalled (values changed to those in the recalled register).