166
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
Amplitude (CDMA Swept Power Measurement)
This field sets the measurement trigger amplitude.
GPIB Example
“CDMA:SWEPtpower:TRIGger:AMPLitude ‘-18 dB’”
sets the trigger amplitude.
Operating Considerations
Enter a value here that is sufficient to trigger the measurement. The selectable
values are:
−
12 dB
, −
18 dB
, and −
24 dB
. The default value is −
12 dB
.
Screens Where Field is Present
CDMA SWEPT POWER MEASUREMENT (When the Controls field is set to
Trigger)
Answer Mode
This field determines whether the Test Set will require answering before
conversation or exchange of other traffic can begin. Use of this field applies only
to mobile station originated calls
• Auto - a mobile station originated call will automatically progress to the
connected state. No ringback tone will be heard on the mobile station’s handset.
• Manual - the ANS key must be pressed to remove the ringback tone from the
mobile station’s audio path and allow user conversation, or other traffic, to be
sent.
GPIB Example
“DISP CCON;CDMA:CALL:ANSWer:MODE ‘MANUAL’”
selects manual mode.
“DISP CCON;CDMA:CALL:ANSWer”
answers a mobile station originated call.
Operating Considerations
Calls will connect faster when Answer Mode is set to Auto.
Screens Where Field is Present
CDMA CELL SITE CONFIGURATION