Filter
Top Products
325
Chapter 4, Description of Fields
Fields
Output Results To
This field selects where test results are output. The underlined entry is the active
choice.
• CRT displays test results on the Test Set’s CRT.
• Printer displays test results on the Test Set’s CRT and outputs them to a printer. (The
printer information must first be entered on the TESTS (Printer Setup) screen.)
Screens Where Field is Present
TESTS (Execution Conditions, Printer Setup)
Page
This field is used to initiate a page to the mobile station connected to the Test Set.
The Test Set must be in the active state (that is,
Active annunciator lit) and the
MS Id information must be correct before attempting to page a mobile station.
The :PAGE command is used to control this field.
There is no query form of the :PAGE command.
Syntax
:PAGE
Example
OUTPUT 714;"CALLP:PAGE"
Screens Where Field is Present
CALL CONTROL