Filter
Top Products
309
Chapter 4, Description of Fields
Fields
GPIB Examples
“DISP CCNT;CDMA:MOBile:MSID ‘AUTO’“
selects “automatic” entry of the mobile station’s MIN and Phone Number through
registration.
“DISP CCNT;CDMA:MOBile:MSID ‘Phone Num’“
enters a mode whereby the Test Set uses the Phone Number number entered by the
user, and ignores phone numbers obtained during registration.
“DISP CCNT;CDMA:MOBile:MSID ‘MIN’“
enters a mode whereby the Test Set uses the MIN number entered by the user, and
ignores MIN numbers obtained during registration.
“DISP CCNT;CDMA:MOBile:MIN ‘56789ABCD’“
enters the mobile station’s MIN number.
“DISP CCNT;CDMA:MOBile:PHONe:NUMBer ‘1509922075’“
enters the mobile station’s phone number.
Operating Considerations for MS ID Field
When a registration occurs, the MS Database field acquires identification values
from the mobile station that is currently connected. The
MS Database field
provides a feature at the end of its list of choices called *Clr All*. This feature
clears the contents of this data base. If you are using MS ID Auto mode, clear the
MS Database before connecting the mobile station to the Test Set. Then, when
the
MS Database gets updated you will know that the MS ID Auto mode has the
identification of the mobile station currently under test, and you can make a Test
Set originated call.
If the
Phone Num, MIN, or IMSI field is selected, the Test Set will use the
number currently entered in the selected field for page attempts. This mode
disallows use of a mobile station under test’s identification obtained through
registration. If an incorrect Phone Num or MIN is entered in these fields, and
Auto mode is not selected, attempts to make a call will be unsuccessful.
When using IMSI, all subfields (MSIN, MCC, MNC) and Max Slot Cycle Index
(CDMA CELL SITE CONFIGURATION screen) are required to bring up a Test
Set originated call.
See Also
Register (CDMA)
field description, on page 358
MS Database
field description, on page 306
Screens Where Field is Present
CDMA CALL CONTROL