Filter
Top Products
48
S:\agilent\e8285\REFGUIDE\MANUAL\keys.chp
Chapter 1, Description of Keys
Keys
To Set the Meter High End and Low End Point Display Units.
Use the :METer:HEND:DUNits and :MEter:LEND:DUNits commands to set the
analog bar-graph meter high end point and low end point display units. Refer to
“
To Specify Units-of-Measure for CRT Display” in the Operating Overview chapter of
the
E8285A User’s Guide for description of display units.
Syntax
:METer:HEND:DUNits <disp_units>
:METer:LEND:DUNits <disp_units>
Example
OUTPUT 714;"MEAS:RFR:POW:MET:HEND:DUN DBM"
OUTPUT 714;"MEAS:RFR:POW:MET:LEND:DUN DBM"
This sets the high end point and low end point display units of the analog bar-
graph meter for the TX power measurement to dBm.
NOTE: When querying the Meter data function through GPIB, the Test Set always returns
numeric values in attribute units, regardless of the current display units or GPIB units
settings. Numeric values are expressed in scientific notation.
To Query the Meter High End and Low End Point Display Units.
Use the :METer:HEND:DUNits? and :MEter:LEND:DUNits? commands to
query the analog bar-graph meter high end point and low end point display units.
Refer to “
To Specify Units-of-Measure for CRT Display” in the Operating Overview
chapter of the E8285A User’s Guide for description of display units.
Syntax
:METer:HEND:DUNits?
:METer:LEND:DUNits?
Example
OUTPUT 714;"MEAS:RFR:POW:MET:HEND:DUN?"
ENTER 714;Met_hidisp_unit$
OUTPUT 714;"MEAS:RFR:POW:MET:LEND:DUN?"
ENTER 714;Met_lodisp_unit$
This queries the high end point and low end point display units of the analog
bar-graph meter for the TX power measurement.
NOTE: When querying the Meter data function through GPIB, the Test Set always returns numeric
values in attribute units, regardless of the current display units or GPIB units settings. Numeric
values are expressed in scientific notation.
See Also
“To Use the Analog Meter Format” in the Operating Overview chapter of the
E8285A User’s Guide