Filter
Top Products
400
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
Softer Handoff (annunciator)
This annunciator is lit when On is selected in the Softer Handoff field. When
the handoff is ended, the
Softer Handoff annunciator goes out.
GPIB Example
“DISP CCNT;STATus:CDMA:CONDition?“
queries the CDMA condition register.
Operating Considerations
During a softer handoff, a handoff direction message is sent to the mobile station
to add Sector B to its active set.
See Also
Softer Handoff
field description, on page 399
Screens Where Field is Present
CDMA CALL CONTROL
Soft Slope
This field is used to enter the parameter SOFT_SLOPE.
This field is displayed only when TIA/EIA-95B is selected in the
"Protocol" field
on page 346
.
GPIB Example
“DISP CMOB;CDMA:MOB:PARM:SSLope 3”
enters 3 in the Soft Slope field.
Operating Considerations
This field setting, along with Add Intcpt and Drop Intcp, control the way that the
mobile station manages pilot sets during soft handoffs. These fields also affect the
conditions which prompt the mobile station to send a Pilot Strength Measurement
Message. Refer to ANSI TIA/EIA-95-B for additional details.
See Also
Expected T_Add
field description, on page 254
Expected T_Drop
field description, on page 255
Add Intcpt
field description, on page 154
Drop Intcpt
field description, on page 237