Filter
Top Products
300
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
Mobile Pwr
This field is displayed when the Mobile Power Mode field is set to “User”. When
this field is displayed, the Test Set requires an estimated mobile station power
level to make CDMA Channel Power measurements.
GPIB Example
“DISP CTXR;CDMA:MOBile:POWer:MODE ‘User’;MPOWer 0“
selects CDMA power measurements without a call connected, and enters an esti-
mated mobile power level of 0 dBm.
Operating Considerations
The Test Set uses the value entered in this field to set up analyzer path attenuation.
See Also
Mobile Power Mode
field description, on page 299
Screens Where Field is Present
CDMA TRANSMITTER POWER RANGE TEST
Mode
This field sets the GPIB operating mode. Talk&Lstn is used for “normal”
GPIB operation.
Control is used to control external instruments using the Test
Set.
This setting is retained when the instrument is turned off.
Screens Where Field is Present
I/O CONFIGURE
Model
This field is used to enter the instrument’s model number. There is no specific
syntax for entering model numbers into this field.
Screens Where Field is Present
TESTS (External Devices)