Filter
Top Products
80
S:\agilent\e8285\REFGUIDE\MANUAL\connectr.chp
Chapter 2, Description of Connectors
Connectors
10 MHz OUTPUT
The 10 MHz output is one output of a reference phase-locked-loop that generates
10 MHz reference signals for all of the digital and analog phase-locked-loops in
the Test Set. This reference phase-locked-loop can lock to many frequencies,
which are listed in the description of the EXT REF INPUT connector.
Operating Considerations
•BNC
• This reference signal will be phase-locked to the reference input if the operating
conditions specified in the EXT REF INPUT connector description are met.
• Nominal output level is >+5 dBm
• Output impedance is 50
Ω
• Frequency stability is the same as the signal applied to the EXT REF INPUT connector.
See Also
"EXT REF INPUT" on page 73