Filter
Top Products
35
Chapter 1, Description of Keys
Keys
End/Release
When this key is pressed, the Test Set disconnects any CDMA-mode call that is
currently connected.
GPIB Example
“DISP CCNT;CDMA:CALL:END”
Enter
Enter is used to select a field or screen, and to enter numbers when the unit-of-
measure is not specified. This function is identical to pressing the cursor-control
knob.
GPIB Example
No equivalent GPIB command
Hold
Press and release the Shift key, then the Meas reset key. This stops all
measurements. Selecting Hold again resumes measurements.
The Hold key is used to hold/resume all active measurements. There is no
equivalent GPIB command for the Hold key. However, the functionality of the
Hold key can be implemented remotely by using single triggering of
measurements.
GPIB Example
No equivalent GPIB command
See Also
“Measurement Triggering Process” in the Operating Overview chapter of the
E8285A User’s Guide
IBASIC reset
The IBASIC reset key is used to stop an IBASIC program currently running.