Filter
Top Products
69
Chapter 2, Description of Connectors
Connectors
AUDIO OUT
The audio output is used to output signals from AF Generators 1 and 2.
Operating Considerations
•BNC
• Output impedance <1
Ω
• Maximum output current = 20 mA peak
• Maximum reverse voltage = 12 V peak
• The output level is set by the AF Generators, and it is not affected by the front-panel
VOLUME control.
• AC/DC coupling is selected using the Audio Out field. This field is available in the
DUPLEX TEST screen, RF GENERATOR screen.
AUD MONITOR OUTPUT
The audio monitor output provides an external output from various tap points in
the AF Analyzer path.
Operating Considerations
•BNC
• Output impedance is < 1 k
Ω
•The Scope To field on the analog AF ANALYZER screen determines the source of
this signal.
• The level is not affected by the front-panel VOLUME knob.
See Also
Scope To
field description, on page 379