Filter
Top Products
330
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
Parity
This field specifies the serial communication parity setting when using the rear-
panel serial port.
This setting is retained when the instrument is turned off.
Screens Where Field is Present
I/O CONFIGURE
The time response to open loop power control tests the mobile station’s response
to a step change in the Test Set’s output power.
GPIB Example
“STATus:OLTR:EVENt?”
queries the Open Loop Time Response status event register. If bit 1 is set, the last
gated power test passed. If bit 2 is set, the last gated power test failed.
GPIB Example
“STATus:CDMA2:EVENt?”
queries the CDMA_2 status event register. If bit 5 is set, the last gated power test
passed. If bit 4 is set, the last gated power test failed.
Pass Word
The Pass Word field allows you to access a secured test procedure file. Test
procedures are secured using the
SECURE_IT program in ROM. Load and run the
ROM
IB_UTIL program to access the SECURE_IT program.
Screens Where Field is Present
TESTS (Save/Delete Procedure)