Filter
Top Products
31
Chapter 1, Description of Keys
Keys
Keys
Address
Press and release the Shift key, then the Local key to display the GPIB address of
the Test Set. There is no equivalent GPIB command for the Address key
Programming Address
The Test Set’s GPIB address can be changed through GPIB by using the
:CONFigure:BADDress commands. If the Test Set’s GPIB address is changed
programmatically, all future GPIB commands must use the new address.
Example
OUTPUT 714;"CONF:BADD 15"
This sets the Test Set’s GPIB address to 15.
The Test Set’s GPIB address can be queried through GPIB by using the
:CONFigure:BADDress? commands.
Example
OUTPUT 714;"CONF:BADD?"
ENTER 714;Address
This queries the Test Set’s GPIB address.
See Also
"I/O Configure Screen" on page 119
Answer
This key functions only when Answer Mode is set to Manual.
Pressing this key answers CDMA-mode mobile-station-originated calls by
removing the ring back tone from the mobile station’s audio path and allowing
user conversation or other traffic to be exchanged.
The Test Set will automatically answer calls if
Answer Mode is set to Auto.
GPIB Example
“DISP CCNT;CDMA:CALL:ANSW”