Filter
Top Products
150
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
Operating Considerations
A sequence of access probes is transmitted as part of the mobile station’s attempt
to gain access to a CDMA system. To determine a mobile station’s access probe
power, select Acc Prb Pwr from the list of power measurement choices. Press the
Config key to access the CDMA CELL SITE CONFIGURATION screen. Select
Page
in the Call limit field. This will prevent a call from going to the Connected
state, resulting in the mobile station transmitting all access probes in its pre-
defined sequence. Several field settings affect the number of access probes and
power levels of each access probe. These fields are:
"RF Power" field on page 371
"Sctr A Pwr" field on page 380
"Sctr B Pwr" field on page 381
"Nom Power" field on page 312
"Nom Pwr Ext" field on page 312
"Init Power" field on page 274
"Power Step" field on page 342
"Num Step" field on page 317
"Max Req Seq, Max Rsp Seq" field on page 294
Screens Where Field is Present
CDMA CALL CONTROL
CDMA CELLULAR MOBILE TRANSMITTER TEST
CDMA TRANSMITTER POWER RANGE TEST