Filter
Top Products
259
Chapter 4, Description of Fields
Fields
FER Report (Clear)
This field allows the user to clear the Errors Reported and Frames Reported fields
on the CDMA MOBILE REPORTED FER screen.
GPIB Example
“DISP CFER;CDMA:MOBile:FER:REPort:CLEar”
clears the Errors Reported and Frames Reported fields.
Screens Where Field is Present
CDMA MOBILE REPORTED FER
FER Spec
This field allows entry of the specified frame error rate (FER) the Test Set will
apply Confidence interval testing to.
GPIB Example
“DISP CRXT;MEASure:CDManalyzer:FERasure:CONFidence:LIMit 0.5”
sets the confidence limit to 0.5% (0.005).
Operating Considerations
This field is only displayed when the Confidence field is on.
See Also
Confidence
field description, on page 207
Screens Where Field is Present
CDMA CELLULAR MOBILE RECEIVER TEST
FF at End
This field can only be controlled programmatically. It is used to specify if you
want a form feed at the end of printing.
Screens Where Field is Present
TESTS (Printer Setup)
PRINT CONFIGURE