Filter
Top Products
391
Chapter 4, Description of Fields
Fields
CMAC Control mobile attenuation field. Indicates the mobile station power level
associated with reverse control channel.
CMAX-1 CMAX is the number of access channels in the system.
CPA Combined paging/access field.
CTYP Channel type indicator.
DCC This field sets the digital color code.
DSCC DSAT color code for the new channel. Also represents SCC for handoff to
a wide analog channel.
DTX Discontinuous transmission field.
E This field displays the extended address word sent to the mobile.
• Set to ‘1’ if the extended address word is sent.
• Set to ‘0’ if the extended address word is not sent.
EF
Extended Protocol Forward Channel Indicator.
END End indication field.
• Set to 1 to indicate the last word of the overhead message train.
• Set to 0 if not the last word.
F1
Control filler message field 1. All bits must be set as indicated.
F2 Control filler message field 2. All bits must be set as indicated.
F3 Control filler message field 3. All bits must be set as indicated.
F4 Control filler message field 4. All bits must be set as indicated.
LOCAL This field is specific to each system. The ORDER field must be set to local
control for this field to be interpreted.
MIN1 First part of the mobile identification number field.
MIN2 Second part of the mobile identification number field.
MSL Message Length. Extended Protocol Message Length.
MST Message Type. Extended Protocol Message Type.
N-1 N is the number of paging channels in the system.
OE The Odd/Even data field is used for adjacent channel protection.