Filter
Top Products
190
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
Call Status
The labels under Call Status are highlighted by annunciators. When lit, these
annunciators indicate that an event took place or that a condition exists. The
CDMA Status Condition Register bits that correspond with
Call Status
annunciators are shown in
table 7.
All call status annunciators can be queried over GPIB.
See Also
RF Channel (CDMA)
field description, on page 364
PN Offset (Sector A Power) field description, on page 338
Traffic (Sector A Power) field description, on page 432
Screens Where Field is Present
CDMA CALL CONTROL
CDMA AUTHENTICATION
CDMA SHORT MESSAGE SERVICE
Table 7 CDMA Status Register Bit Definitions
Status LED CDMA Status Condition Register Bit
Transmitting 2
Registering No Condition Register Bit available. See
"Registering (annunciator)" on page
360
.
Page Sent 1
Access Probe 0
Connected 3
Softer Handoff 5
Hard Handoff 6
SMS Sent
a
a. CDMA Short Message Service Screen Only
SMS Ack Received
a
SSD Update
b
b. CDMA Authentication Screen Only
Uniq Chall
b