Filter
Top Products
260
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
FF at Start
This field can only be controlled programmatically. It is used to specify if you
want a form feed at the start of printing.
Screens Where Field is Present
TESTS (Printer Setup)
PRINT CONFIGURE
Filter 1
This field selects one of several standard or optional audio frequency filters which
can be used to condition the audio signal before being analyzed by the Audio
Frequency Analyzer. See “AF Analyzer” in the GPIB Command Syntax chapter
of the E8285A Condensed Programming Reference Guide for programming
command syntax.
Screens Where Field is Present
AF ANALYZER
ANALOG MEAS
DUPLEX TEST
RX TEST
TX TEST
Filter 2
This field selects one of several standard or optional audio frequency filters which
can be used to condition the audio signal before being analyzed by the Audio
Frequency Analyzer. See “AF Analyzer” in the GPIB Command Syntax chapter
of the E8285A Condensed Programming Reference Guide for programming
command syntax.
Screens Where Field is Present
AF ANALYZER
ANALOG MEAS
DUPLEX TEST
RX TEST
TX TEST