Filter
Top Products
436
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
Tune Freq
This field is displayed on the screens listed below when the RF Display field on
the CONFIGURE screen is set to “Freq
”.
RF analyzer tune frequency sets the center frequency for the RF signal to be
analyzed.
Operating Considerations
The Test Set does not perform auto tuning. The operator must enter the desired
tune frequency or use the Test Set’s default RF Display field setting, Chan
, and
enter a channel number.
See Also
RF Channel (CDMA)
field description, on page 364 and RF Channel
(analog)
field description, on page 363.
Screens Where Field is Present
ADJACENT CHANNEL POWER
DUPLEX TEST
RF ANALYZER
TX TEST