Filter
Top Products
188
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
by # frames
When this field is On, the mobile station will report FER at least as often as the
mobile station’s frame counter cycles through the number of frames entered in the
MS FER Report Interval field.
GPIB Example
“DISP CFER;CDMA:MOBile:FERasure:REPort:BY:FRAMes:STATe ’ON’“
causes the mobile station to report FER based on frame count.
Operating Considerations
If by # errors is On, FER reporting can occur more frequently than the frame
count specified by
MS FER Report Interval.
See Also
by # errors
field description, on page 187
Screens Where Field is Present
CDMA MOBILE REPORTED FER
Called Number:
This field displays the called phone number, in decimal form, received from the
mobile station on the reverse control channel when the mobile station originates a
call. The
Called Number: field is displayed only when the Display field is set
to
Data and a reverse control channel message has been decoded when the mobile
originates a call. See
"Display" field on page 223 for information on how to read
measurement results from this field.
See Also
For CDMA calls see "MS Database" field on page 306
Screens Where Field is Present
CALL CONTROL