Filter
Top Products
342
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
Screens Where Field is Present
CDMA CALL CONTROL
CDMA TRANSMITTER POWER RANGE TEST
CDMA CELLULAR MOBILE TRANSMITTER TEST
Power Step
This field allows entry of the power increment (PWR_STEP).
GPIB Example
“DISP CCON;CDMA:CELL:CONFigure:STEP:POWer 0“
sets PWR_STEP to 0.
Operating Considerations
This field specifies the step increase in transmit power between each access probe
within an access probe sequence from a mobile station.
To make power level measurements during an access attempt, set the
Call
Limit
field on the CDMA CALL CONTROL screen to Page. With Call Limit
set to
Page, the base station’s response to access probes is inhibited, and the
mobile station will continue with an access attempt until its maximum number of
access probe sequences has been transmitted.
See Also
Call Limit
field description, on page 189
Screens Where Field is Present
CDMA CELL SITE CONFIGURATION
Print All
This field allows you to print the Test Set’s screen image.
Screens Where Field is Present
TESTS (Channel Information, Test Parameters, Order of Tests, Pass/Fail Limits,
External Devices)