Filter
Top Products
170
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
Audio Out
Audio output coupling selects ac or dc coupling of the AF Generator to the
AUDIO OUT connector.
Operating Considerations
This field should be set to DC for best results when using the AUDIO OUT
connector and low data rates.
Screens Where Field is Present
DUPLEX TEST
RF GENERATOR
Authen
This field turns CDMA authentication On or Off.
When CDMA authentication is
On, the Test Set signals the mobile station to go
into authentication mode (AUTH
s
is set to ‘01’) when registrations, call
originations, pages, or data bursts are performed.
The results of authentication procedures will be displayed in the Authentication
Data Table.
See "Authentication Data Table" on page 171.
Operating Considerations
When Authen is On, the Test Set will display the authentication parameters which
the mobile station is required to send to a base station as part of the protocol’s
authentication procedures.
When
Authen is Off, the expected AUTH_MODE parameter will be ‘0’, and any
other authentication parameters displayed in the Authentication Data Table will
be dashes (-).
GPIB Example
CDMA:CELL:CONF:AUTH:MODE ‘ON’
turns Authentication “On”
See Also
Authentication Tests, E8285A Application Guide
Screens Where Field is Present
CDMA AUTHENTICATION