Filter
Top Products
158
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
AFGen1 To
This field has two fields:
• the upper field sets the destination port for Audio Frequency Generator 1
• FM -RF Generator FM modulator
• AM -RF Generator AM modulator
• Audio Out -AUDIO OUT connector on front panel of Test Set
• the lower field sets the:
• FM modulation deviation if the upper field set to FM
• AM modulation depth if the upper field set to AM
• amplitude of audio signal (volts RMS) at the AUDIO OUT connector if upper field
is set to Audio Out
For testing mobile stations, the upper field is normally set to FM, and the lower
field set to the desired FM deviation in kHz. See “AF Generator 1” in the GPIB
Command Syntax chapter of the E8285A Condensed Programming Reference
Guide for programming command syntax.
Operating Considerations
This is a priority control field. Accessing the RX TEST or TX TEST screen
overrides any changes made to this field in other screens.
Screens Where Field is Present
ADJACENT CHANNEL POWER
ANALOG MEAS
DUPLEX TEST
RX TEST
RF GENERATOR
AFGen2 Freq
This Audio Frequency Generator control sets the frequency for the second audio
frequency sinewave generator.
Screens Where Field is Present
RF GENERATOR
RX TEST