Filter
Top Products
349
Chapter 4, Description of Fields
Fields
Screens Where Field is Present
CALL CONTROL
Pwr Up Reg
This field determines if, at power-up, the mobile station will attempt to register
with the Test Set.
• On - the mobile station will perform a power-up registration
• Off - the mobile station will not perform a power-up
registration
GPIB Example
“CDMA:CELL:CONF:PUR ‘On’"“
causes the mobile station to attempt to register at power-up
Operating Considerations
This field provides the option of performing a zone-based registration when a
mobile station finds service (
Register (CDMA) field description, on page 358)
instead of waiting for the power-up registration.
This field should be set to the desired mode before a mobile station finds CDMA
service.
When this field is “On” the Test Set instructs the mobile station to attempt a
registration upon power-up. This instruction is sent as part of the paging channel
overhead message System Parameters, and is received by the mobile station soon
after the mobile station finds service.
See Also
“Setting up a Call” chapter in the E8285A Application Guide
Screens Where Field is Present
CDMA CELL SITE CONFIGURATION