Filter
Top Products
445
Chapter 4, Description of Fields
Fields
Vert/div
Vertical sensitivity sets the vertical amplitude per division.
Operating Considerations
The value for this field is selected from a list of choices.
Depending on the AF Analyzer’s
AF Anl In setting, the units for this field may
be in Volts, kHz, or Percent (AM). For example; if the
AF Anl In field is set to
FM Demod, the amplitude is displayed in kHz/div.
Screens Where Field is Present
OSCILLOSCOPE
Vert Offset
Vertical offset moves the displayed signal above or below the oscilloscope’s fixed
centerline.
Operating Considerations
A centerline is displayed for the signal when an offset is used.
When the vertical offset is
≠0.00, the marker level is referenced to the center line
generated by the vertical offset feature, not the center line of the screen.
Screens Where Field is Present
OSCILLOSCOPE