Filter
Top Products
257
Chapter 4, Description of Fields
Fields
Ext NGHB
This field allows the user to select whether to enable the custom neighbor list, the
Sc Priority field, and the NGHB Fq (Ch) field.
GPIB Example
“CDMA:CELL:CONF:EXNB ‘On’”
enables or disables the custom neighbor list and associated fields.
Operating Considerations
This is an immediate action toggle field. If it is set to On, the Sc Priority field
and the
NGHB Fq (Ch) field appear on the screen, and the custom neighbor list is
enabled. If it is set to
Off, the fields do not appear and the list is disabled.
The default is
Off.
The field appears only if a valid protocol is selected in the
Protocol field. The
valid protocols are:
TIA-EIA-98-B
ARIB-53
J-STD-008
Kor PCS
Screens Where Field is Present
CDMA CELL SITE CONFIGURATION
The time response to open loop power control tests the mobile station’s response
to a step change in the Test Set’s output power.
GPIB Example
“STATus:OLTR:EVENt?”
queries the Open Loop Time Response status event register. If bit 1 is set, the last
gated power test passed. If bit 2 is set, the last gated power test failed.
When a mobile station is operating in variable data rate transmission mode, the
RF power is gated on during randomized 1.25 ms periods. During a CDMA Gated
Power measurement the Test Set analyzes an ensemble of gated-on periods,
referred to as bursts. The number of bursts used is controlled by the
"Num of Bits"
field on page 316