Filter
Top Products
248
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
Esc Mode
This field is displayed when the field called "Protocol" on page 346 has IS-95A,
TSB-74, or J-STD-008 selected.
This field, when set to “On”, configures the Test Set as a base station that is
compatible with any Country Code/Network Code combination that a mobile
station is programmed with.
• On (enables escape mode)
• Off (disables escape mode)
GPIB Example
“CDMA:CELL:CONF:EMOD ‘On’”
enables escape mode.
Operating Considerations
When Escape Mode is “On”, the Cntry Code and Netwrk Code fields are no
longer needed and are removed from the Cell Site Configuration screen. The
mobile station may still require a specific Network ID and System ID setting to
find service from the Test Set.
See Also
Protocol
field description, on page 346
Screens Where Field is Present
CDMA CELL SITE CONFIGURATION
ESN (dec):
This field displays the electronic serial number (ESN), in decimal form, received
from the mobile station on the reverse control channel in response to a forward
control channel message. The
ESN (dec): field is displayed only when the
Display field is set to Data and a reverse control channel message containing
this information has been decoded.
Refer to the
"Display" field on page 223 for information on how to read
measurement results from this field.
Screens Where Field is Present
CALL CONTROL