Filter
Top Products
410
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
SSD Update (annunciator)
When lit, this annunciator indicates that an SSD Update is in progress. A
successful completion of SSD Update results in a
Passed indication in the
Authentication Data Table (no authentication parameters are displayed from SSD
Update).
See Also
Call Status
field description, on page 190
SSD Update
field description, on page 409
Screens Where Field is Present
CDMA AUTHENTICATION
Status (Mobile Reported Pilot Strength)
This column in the CDMA Mobile Reporting table lists the received pilots’status.
• Active - pilot is a member of the Active Set
• Candidate - pilot is a member of the Candidate Set
• To Drop - pilot’s signal strength has dropped below T_Drop
• To Add - pilot’s signal strength has exceeded T_dropped below T_Drop
All numbers displayed in the CDMA Mobile Reporting table reflect the last pilot
strength message received from a mobile station. A Pilot Strength Message is sent
from the mobile station when a Softer Handoff is executed, ended, or when the
mobile station detects a change in pilot levels that affects the assignment of pilots
to the mobile station’s Active, Candidate, or Neighbor sets.
The CDMA Mobile Reporting table can be cleared by selecting the
Pilot Meas
(Clear)
field.
GPIB Example
“DISP CMOB;CDMA:MOB:PIL:STR?“
queries the results displayed in the CDMA Mobile Reporting table.
The value returned by the Test Set includes Status, PN Offset, Strength, and Keep
for each pilot currently being tracked by the mobile station. These values are sent
as a comma-separated list of IEEE floating point numbers, 16 characters each,
ending with a line feed character.