Filter
Top Products
46
S:\agilent\e8285\REFGUIDE\MANUAL\keys.chp
Chapter 1, Description of Keys
Keys
To Query the State of the Meter.
Use the :METer:STATe? commands to query the state of the analog bar-graph
meter. The query returns a 1 if the meter is ON, and a 0 if the meter is OFF.
Syntax
:METer:STATe?
Example
OUTPUT 714;"MEAS:RFR:POW:MET:STAT?"
ENTER 714;Meter_on_off ! returns a 1 (ON) or 0 (OFF)
This queries the state of the analog bar-graph meter for the TX power
measurement.
To Set the Number of Intervals on the Meter.
Use the :METer:INTerval commands to set the number of intervals displayed on
the analog bar-graph meter.
Syntax
:METer:INTerval <integer valve>
Example
OUTPUT 714;"MEAS:RFR:POW:MET:INT 5"
This sets the number of intervals displayed on the analog bar-graph meter for
the TX power measurement.
To Query the Number of Intervals on the Meter.
Use the :METer:INTerval? commands to query the number of intervals displayed
on the analog bar-graph meter.
Syntax
:METer:INTerval?
Example
OUTPUT 714;"MEAS:RFR:POW:MET:INT?"
ENTER 714;Num_intervals
This queries the number of intervals displayed on the analog bar-graph meter
for the TX power measurement.