Filter
Top Products
335
Chapter 4, Description of Fields
Fields
Pilot Meas (Clear)
The Pilot Meas (Clear) field clears the contents of the CDMA Mobile
Reporting table.
GPIB Examples
“DISP CMOB;CDMA:MOBile:PILot:CLEar“
clears the contents of the CDMA Mobile Reporting table.
Operating Considerations
All numbers displayed in the CDMA Mobile Reporting table reflect the last pilot
strength message received from a mobile station. A Pilot Strength Message is sent
from the mobile station when a Softer Handoff is executed, ended, or when the
mobile station detects a change in pilot levels that affects the assignment of pilots
to the mobile station’s Active, Candidate, or Neighbor sets. Use Pilot Meas
(Clear) to ensure that the currently displayed CDMA Mobile Reporting table
See Also
Keep
field description, on page 281
PN Offset
field description, on page 336
Status (Mobile Reported Pilot Strength)
field description, on page 410
Strength
field description, on page 416
Screens Where Field is Present
CDMA MOBILE REPORTED PILOT STRENGTH
Pk Det To
Peak Detector To selects the signal source for the peak detectors. This allows you
to bypass certain sections of the AF analyzer’s circuitry when making ac-level
measurements.
See Also
"AF Analyzer Block Diagram" on page 85
Screens Where Field is Present
AF ANALYZER