Filter
Top Products
148
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
Fields
Abort Print
Select this field to interrupt the print in progress.
GPIB Example
Abort Print is not directly programmable over the GPIB.”
Screens Where Field is Present
PRINT CONFIGURE
Access (annunciator)
When lit, the Access annunciator indicates the Test Set is signaling the mobile
station with command information on the forward voice channel. This is a
transitory state.
The state of the
Access annunciator is reflected in the Call Processing Status
Register Group Condition Register bit 4.
See “Call Processing Status Register Group” in the Status Reporting chapter of
the Agilent Technologies E8285A User’s Guide for further information.
The Test Set’s speaker is turned off when in the access state. This is done to
eliminate any possible audio feedback which may occur if the mobile station’s
microphone is open.
GPIB Example
“DISP CCNT;STATus:CDMA:CALLP:COND?”
queries the analog Call Processing event register. Bit four will be true (1) when an
analog call is in the Access state. Also, the Access annunciator on the CALL CON-
TROL screen is lit when an analog call is in the Access state.
Screens Where Field is Present
CALL CONTROL
CALL DATA
CALL BIT