Filter
Top Products
266
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
Freq Error (Analog)
This field displays frequency error when Freq Error is selected from the following
list of choices available in an unnamed field at the top of the display:
• Freq Error
• Frequency
GPIB Example
“DISP DUPL;MEAS:RFR:SEL ‘Freq Error’”
displays the Freq Error measurement field.
Operating Considerations
This field displays the frequency error (error = assigned carrier frequency -
measured carrier frequency) of the carrier being transmitted by the mobile station.
Four dashes (----) indicates that there is no signal at the present tune frequency.
See Also
Frequency (Analog)
field description, on page 267
Screens Where Field is Present
RF ANALYZER
DUPLEX TEST
RF GENERATOR
AF ANALYZER
ADJACENT CHANNEL POWER
TX TEST
CALL CONTROL (when Meas is selected in the Display field)