Filter
Top Products
209
Chapter 4, Description of Fields
Fields
Connect (annunciator)
When lit, the Connect annunciator indicates that the mobile station is connected
to the Test Set on a voice channel.
NOTE: When the CALL CONTROL screen is displayed and the Call Processing Subsystem is in the
connected state (Connect annunciator is lit), the Test Set constantly monitors the mobile
station’s transmitted carrier power. If the power falls below 0.0005 Watts the Test Set will
terminate the call and return to the active state (Active annunciator is lit). The mobile
station’s transmitted carrier power is monitored on all Call Processing Subsystem screens
except the ANALOG MEAS screen.
If the Test Set is in the connected state (Connect annunciator is lit) and a change is made to
the Cntl Channel field the connected state will be lost.
The state of the Connect annunciator is reflected in the Call Processing Status
Register Group Condition Register bit 5.
See “Call Processing Status Register Group“ in the Status Reporting chapter of
the E8285A User’s Guide for further information.
The
Connect annunciator is not programmable.
Screens Where Field is Present
CALL CONTROL
CALL BIT
CALL DATA